Via Ludibunda goes 3D

treps

treps

Member
Hi there,

We just launched a kickstarter campaign for 3D printable models, join us at https://www.kickstarter.com/projects/vi ... escription to be part of the futurehammer revolution ;)

Here is an example of what you could print on a 3D printer with the 60€ pledge !

12596791_10208701262837260_1092354260_o.jpg


Bruno
 
Fimm McCool

Fimm McCool

Member
I'm intrigued, but don't have a 3d printer and only limited experience running one. Can you give a guide as to how much material cost would be to print that and how long it would take/wear and tear on machine?
 
treps

treps

Member
Fimm McCool":16cddrhg said:
I'm intrigued, but don't have a 3d printer and only limited experience running one. Can you give a guide as to how much material cost would be to print that and how long it would take/wear and tear on machine?
Click to expand...
I will explain all this in the forthcoming updates of the KS but will make a recap for you here if you want :)

@Zhu : thanks mate !
 
treps

treps

Member
Zhu, I'm sure that if you do look well you'll see some designs that might have been directly inspired and derived from some old paper models included in old scenarios packs and Warhammer Townscape ;)
 
You must log in or register to reply here.
Back
Top