MadGav
Member
I've been spray painting some old lead with a GW can and have been having problems. With light spraying, the paint tended to stick in the crevices and leave the raised surfaces bare. So I thought I would give them a second light coat - but now it's too thick and some of the detail has been lost .
Any suggestions? I was doing it in the garage (ventilation y'know) when it was only 4C outside so I'm thinking it may have been too cold. The can does say 15-25C, which I thought was just one of those instructions you don't need to worry about. But perhaps you do.
I've never had this problem with previous spray cans but it did make me wonder if GW have changed the formulation and it no longer works so well on metal.
Any thoughts?
Any suggestions? I was doing it in the garage (ventilation y'know) when it was only 4C outside so I'm thinking it may have been too cold. The can does say 15-25C, which I thought was just one of those instructions you don't need to worry about. But perhaps you do.
I've never had this problem with previous spray cans but it did make me wonder if GW have changed the formulation and it no longer works so well on metal.
Any thoughts?